Categories Gens ace Lipo battery Aircraft & Heli packs Gens ace 2200mAh 11.1V 25C 3S1P Lipo Battery Pack
|
|
Gens ace 2200mAh 11.1V 25C 3S1P Lipo Battery PackProduct no.: B-25C-2200-3S1PSpec. - Product Type:lipo battery pack - Capacity: 2200mAh - Voltage: 11.1V - Max Continuous Discharge: 25C (55A) - Max Burst Discharge: 50C (110A) - Weight:: 195 g - Dimensions: 105.68*34.15*25.71 mm - Balance Plug: JST-XH - Discharge Plug: T plug - Charge Rate: 1-3C Recommended, 5C Max
Gens ace lipo 2200mah 3s1p 25c/50c battery Suited to the following models: Most 450 size
helicopter, Fun Cub, Fox Glider, Wild Hawk, P-51, Parkzone etc.
1. Matched strictly by the lowest internal resistance/ capacity/ and voltage for maximum
power and cycle life. 2. Standard JST/XH Balance Plug 3. Easily monitor the condition of the battery 4. Provide greater speed and longer runtimes 5. 5C fast charge capable 6. Gens ace lipo pack are always advertised with its actual C ratings
Gens ace is dedicated to the design and manufacture of Lipo packs, Nimh battery, Life packs.
We set our warehouse in Germany to bring you the products in shortest time with an
unbeatable combination of price and performance.
Our low internal resistance and high cycle life ensure that you are getting maximum value
from your battery. All our airplane & heli Lipo battery use ORACOVER shrink which quality is
known throughout the world. Some of our flight batteries use aluminium plate with both sides
so that release the heat more quickly and also protect the battery when it drops.
While our C ratings may be 20-90% lower than other brands, you'll find that Gens ace battery
pack will regularly outperform other brand' higher rated batteries. Gens ace lipo pack are
always advertised with its actual C ratings - compare our internal resistance values with
their competitors and you'll see the difference. Our unique construction method would
maximize full performance potential of Gens ace battery.
|
Additional product information
| Item No | B-25C-2200-3S1P |
| Net Weight (g) | 195 |
| Gross Weight (g) | 232 |
| Capacity (mAh) | 2200 |
| Discharge rate ( C ) | 25 |
| Max burst discharge rate ( C ) | 50 |
| Max cont current (Amp) | 55 |
| Max burst current (Amp) | 110 |
| Series (S) Parallel (P) | 3S1P |
| Length(mm) | 105.68 |
| Width (mm) | 34.15 |
| Thickness(mm) | 25.71 |
| Wire Gauge | 14 |
| Balancer connector type | JST-XH |
| Connector type | T-plug |
| Vol. Gap | <0.01V |
| IR(mohm) | <35mohm |
| Wire length(C/D) | 50mm/100mm |
Browse these categories as well: Aircraft & Heli packs, Lipo 3S-11.1V, Lipo 2200mAh, 450 Batteries, Batteries for 70MM EDF, Lipo 25C, Hot items, Gens ace Batteries for Multi Rotor Helis
We also recommend
 |
Price includes VAT, plus delivery
Customers who bought this product also bought
Delivery weight: 121.25 g
|
Delivery weight: 85 g
|
Delivery weight: 62.5 g
|
Delivery weight: 652.5 g
|
Delivery weight: 88.63 g
|
Delivery weight: 152.5 g
|
Delivery weight: 285.5 g
|
Delivery weight: 58.63 g
|
Delivery weight: 259 g
|
Delivery weight: 268.88 g
|
Delivery weight: 465 g
|
Delivery weight: 173 g
|
Price includes VAT, plus delivery
Customer ratings for this product
Average rating: 5
Ich hab eine GensACE 3s 2200mAh 25C/50c Softcase abbekommen.
Alle drei Zellen haben recht genau 3.84V im Auslieferungszustand gehabt. Verarbeitung sieht sehr gut aus. Um vergleichbare Ergebnisse zu erhalten hab ich aber gleich mal 6mm slit-Stecker dran gelötet, obwohl die verbauten 4mm Federkontaktstecker auch gut aussehen(4mm Stecker/Buchse im Doppelgehäuse aus Kunstoff).
Nach dem ich die ersten drei Lade- und Entladezyklen etwas gemächlicher bestritten hatte(laden 1C 4.2V, entladen 2C 3.5V), ist beim Entladen ein ZellenDrift kaum noch nachweisbar. Selbst beim Laden muß der Balancer praktisch nicht mehr eingreifen, somit ist die Ladedauer angenehm kurz. Kapazität war auch größer als angegeben (2348mAh). Der Innenwiederstand hat meine Erwartungen auch voll erfüllt(bei mir 3mO,3mO,3mO), besonders weil bei meinen "VergleichsLipos" (turingy 1600mA 20C) der Innenwiederstand mehr als 6mal so hoch ist(18mO ,20mO ,18mO). Über die Wattstunden und Zyklenfestigkeit werde ich erst nach 10Ladezyklen genaueres sagen können.
Ein Verbesserungsvorschlag hätte ich aber auch noch. Vieleicht könnte man, um die BalancerStecker besser vor Verschmutzung zu schützen, ein Gehäuse mit Knickschutz um den Balancerstecker machen. Dadurch lässt sich der Balancerstecker besser greifen, die Balancerkabel brechen nicht mehr, und die BalancerKontakte verschmutzen nicht mehr. Die Mehrkosten für die drei SpritzgusTeile wäre ja sehr gering, würde aber einiges mehr an Komfort und Schutz bieten.
Well then I'll even out my hand over my TestLipo presents my first results.
I have a 3s 2200mAh 25C/50C Gensac gotten soft case.
All three cells have been fairly accurate 3.84V at delivery. Processing looks very good. In order to obtain comparable results the same time but I've slit 6mm connector soldered to it, although the built-in 4mm spring contact connectors look good (4mm plug / socket in a double plastic casing).
After I had played the first three charge and discharge more leisurely (1C charge 4.2V, 3.5V unloaded 2C), is unloading a cellular drift barely detectable. Self loading balancer must intervene effectively disappeared so the charging time pleasantly short. Capacity was also higher than indicated (2348mAh). The internal resistance has also fully met my expectations (in my 3mo, 3mo, 3mo), especially because in my "VergleichsLipos" (turingy 1600mA 20C) of the internal resistance for more than 6 times as high (18mo, 20mo, 18mo). About the watt-hour cycles and strength I can say after 10Ladezyklen accurate.
A suggestion for improvement but I would too. Maybe you could order the balancer to better protect against dirt, making a housing with strain relief for the balancer. This allows better access to the balancer, the balancer is no longer break, and the BalancerKontakte not pollute. The additional costs for the three SpritzgusTeile would be very low, but would offer much more comfort and protection.